The old driver tells you how to judge the normal operation of the car's boneless wiper

    Before driving, check whether the car's boneless wiper can pull up the wiper normally, and touch the cleaned rubber wiper with your finger to check whether it is damaged and the elastic state of the rubber blade. If the blade is aging, hardened, and cracks are revealed, the wiper is not suitable for the standard, and it is necessary to change the easy rain as soon as possible to check whether the wiper is maintained at a certain speed with a different speed.

     Especially under the condition of uninterrupted use, pay attention to whether the car's boneless wiper maintains a certain speed during operation. In addition, if the wiper is in the wiping condition, if it shows a reverse swing, abnormal beating, and noise; rubber contact surface There is no way to fit the glass surface, and the wiping remains; or the water film appears on the glass surface after wiping, and the tiny patterns, fog and lines are left on the screen glass, then the car's boneless wiper is a substandard standard. You can identify the quality of the wiper by listening to the sound.

What water to add to the car wiper

Wholesale car wiper blades

     When the car's boneless wiper motor "buzzes" and cannot be turned, under normal circumstances, the wiper mechanical transmission is partially rusted or stuck. At this time, the wiper switch should be turned off immediately to prevent burning and destroying the motor. Explain that the wiper is an unqualified standard, and it is not complicated to change the working mode of the wiper, you can do it yourself. But it should be understood what specifications of wipers have been used so far, please refer to the manual.