Disassembling car bone wiper

Disassembling car bone wiper

First of all, the wiper must be fully erected. In order to avoid damage to the windshield during disassembly and assembly, it is recommended that the owner put a cloth on the windshield when disassembling the wiper.

Set up the car wiper, change the angle of the wiper blade, and then change the angle of the wiper blade so that it is at a 90 degree angle to the wiper arm. Because the wiper blade and the swing arm are locked by clips, it is easy to disassemble and assemble after being at a certain angle.

Disassemble the wiper blade and place it at an angle to start disassembly. First, lift the rubber blade with one hand. The wiper blade is to expose the wiper arm and the fixed hook of the blade.

Take off the wiper blade as a whole. Below, one hand breaks open the rubber blade horizontally, and the other hand of the wiper motor presses down the main bracket forcefully to separate the wiper blade from the swing arm. After that, the wiper can be removed. The scraper is taken off as a whole.

This article is original by the manufacturer of car boneless wiper blades, please indicate http://www.c-eu.cn/